Chargers

Click on photo to enlarge

Redox ONE

Simple redox battery charger with buildt in balancer packages targeted for 2-3 Li-Poly packs.

Characteristics:
Dimensions: 88 x 57 x 35 mm
Weight: 100 g (without cord)
Number of Supported Cells: 2-3 LiPo
Supply Voltage: 110 - 240V AC
Max. charging current: 800 mA
Signaling messages with three built-in LEDs
Built-in socket:
1 x 2s (standard 3E MODEL)
1 x 3s (standard 3E MODEL)

Redox ALPHA V2

The new, improved version of the popular Alpha charger from Redox.

Redox Alpha V2 have the new updated Software for long and stable operation. In addition, at the top of the charger is mounted a large heat sink for conducting heat well.

Characteristics:
- Dimensions: 134 x 86 x 26 mm
- Operating Voltage: DC 11.0 ~ 18.0 V
- Power output:

----------(Click on photo to open gallery)----------

- Max. Charge power 50W
- Max. Discharge power 5W
- Charging current: 0.1 ~ 5.0A
- Discharging current: 0.1 ~ 1.0A
- Current balancing: 300 mAh / cell
- Number of supported cell NiCd / NiMH 1 ~ 15 cells
- Number of supported target Li-Po/Fe/Ion: 1 ~ 6 target
- Supported batteries Pb: 2 ~ 20V
- Weight (without cable) 400 g
- Built-in charger memory: max. 5 packages
- Cycle feature packages
- Four programming buttons
- Built-in socket:
- balancer socket for 2s, 3s, 4s, 5s, 6s
- slot at Gold 4 mm plugs
- Jack (12V DC)
- slot at the optional temperature sensor

Contents:
- Redox Alpha V2 charger
- 12V DC Power Cable (Jack - Alligator Clips)
- 1 x 4 mm Gold Adapter - Plug DEAN
- Additional adapters extending Gold 4 mm adapter - Plug DEAN:
- 1 x Adapter Jack Dean - Alligator Clips
- 1 x Adapter Socket DEAN - Power servo (Futaba type)
- 1 x Adapter Jack Dean - dummy spark plug (for charging clips 1,5 V)
- 1 x Adapter Jack Dean - BEC Connector
- User manual


Redox BETA

Universal charger for most of availible packages

Characteristics:
- Dimensions: 113 x 65 x 23 mm
- Operating Voltage: DC 11.0 ~ 18.0 V or AC / - DC 230V 5A
Power output:
- Max. Charge power 50W
- Max. Discharge power 5W
- Charging current: 0.1 ~ 5.0A
- Discharging current: 0.1 ~ 1.0A
- Current balancing: 300 mAh / cell
----------(Click on photo to open gallery)----------

- Number of supported cell NiCd / NiMH 1 ~ 15 cells
- Number of supported target Li-Po/Fe/Ion: 1 ~ 6 target
- Supported batteries Pb: 2 ~ 20V
- Weight (without cable): 195 g
- Built-in charger memory: max. 5 packages
- Cycle feature packages
- Four programming buttons
- Built-in socket - XT-60 type

Capabilities:
-Discharging function
-Support LiPo / LiFe
-Fast charge function and storage charge mode
-Auto limit current
-Programable limits of capacity
-Charging time limits
-Continous monitoring of current input voltage on buildt-in display
-Save and load your own settings

Charger is availible in two versions COMBO and SOLO

COMBO set includes:
-Charger
-1x multiadapter with Tamiya, Mini Tamiya, BEC, Futaba , EC3
-Power Adapter AC / DC 230V 5A with a 230V power cable.
-12V DC Power Cable (Jack - Alligator Clips)
-Plug adapter to balancer

SOLO set includes:
-Charger
-1x multiadapter with Tamiya, Mini Tamiya, BEC, Futaba , EC3
-12V DC Power Cable (Jack - Alligator Clips)
-Plug adapter to balancer

.

.